Eibach | PRO-SPACER Kit (15mm Pair) - Stinger / GT / 6 2003-2022

Kia

2019 Stinger L4 2.0L Turbo SEE NOTE2
2018-2019 Stinger L4 2.0L Turbo SEE NOTE3
2022 Stinger GT V6 3.3L Turbo SEE NOTE1
2019-2021 Stinger V6 3.3L Turbo SEE NOTE2
2020 Stinger GT V6 3.3L Turbo SEE NOTE2
2018-2021 Stinger V6 3.3L Turbo SEE NOTE3
2020 Stinger GT V6 3.3L Turbo SEE NOTE3

Mazda

2003 6 L4 2.3L SEE NOTE4
2004-2007 6 L4 2.3L SEE NOTE5
2003 6 V6 3.0L SEE NOTE4
2004-2007 6 V6 3.0L SEE NOTE5

Note 1: 15mm Spacer / PCD 5x114.3 / Hub 67.1; When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.; Do not use with vehicles equipped with steel wheels!;
Note 2: 15mm Spacer / PCD 5x114.3 / Hub 67.1; When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.; Do not use with vehicles equipped with steel wheels!;; Drive Type: AWD
Note 3: 15mm Spacer / PCD 5x114.3 / Hub 67.1; When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.; Do not use with vehicles equipped with steel wheels!;; Drive Type: RWD
Note 4: 15mm Spacer / PCD 5x114.3 / Hub 67.1; When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.; Do not use with vehicles equipped with steel wheels!;Body Type: Sedan;
Note 5: 15mm Spacer / PCD 5x114.3 / Hub 67.1; When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible.; Do not use with vehicles equipped with steel wheels!;Body Type: Wagon;